Sub Distribution Board

Type Test CertificateCertificate of verification tests 
comply with IEC 61439-2 standard.
By ASTA
Certificate of design verification 
comply with IEC 61439-2 standard.
By 3 PHASE DESIGN 
Dielectric properties 
characteristic.
Rated insulation voltage Ui:690V
Rated operation voltage Ue:415V
Rated impulse withstand voltage Uimp:Up to 8kV
Overvoltage category:IV
Pollution degree:3
Horizontal Main Busbar 
characteristic.
Rated current In:Up to 1000A
Rated short-time withstand current Icw:Up to 36kA/3s
Up to 62kA/1s
Rated peak withstand current Ipk:Up to 75kA
Enclosure characteristic.Degree of protection of external enclosure.IP42
Internal separation.Up to form 3B
Metal sheet: (Electrogavalnazied Steel)EG
+ Main frame thickness1.5mm
+ Outer door thickness1.5mm
+ Inner door thickness1.2mm
Epoxy powder coating:Indoor type
+ Color code:RAL 7035 
(Texture or Smooth)
+ Thickness:Min 50 microns
InstallationMounted typeFloor standing
LocationIndoor
AccessFront or Front & Rear
Cable entryTop and Bottom
DimensionsDepend on single line requirement and request
compliance with our type test.
(H*W*D)mm