Motor Control Center

Type Test CertificateCertificate of verification tests 
comply with IEC 61439-2 standard.
By ASTAKEMA
Certificate of design verification 
comply with IEC 61439-2 standard.
By 3 PHASE DESIGN 
Dielectric properties 
characteristic.
Rated insulation voltage Ui:690V
Rated operation voltage Ue:415V
Rated impulse withstand voltage Uimp:8kV
Overvoltage category:IV
Pollution degree:3
Horizontal Main Busbar 
characteristic.
Rated current In:Up to 6300A
Rated short-time withstand current Icw:Up to 100kA/3s
Up to 173kA/1s
Rated peak withstand current Ipk:Up to 220kA
FunctionsDesign to control Motors via. 
+ DOL, SD, SOFSTARTER, VSD … 
+ Circuit control, PLC + HMI controller  
+ Auto, Man mode control. 
Enclosure characteristic.Degree of protection of external enclosure.IP43
Internal separation.Up to form 4B
Metal sheet: (Electrogavalnazied Steel)EG
+ Main frame thickness2.0mm
+ Outer door thickness2.0mm
+ Inner door thickness1.2mm
Transparence tempered glass safety door5.0mm
Epoxy powder coating:Indoor type
+ Color code:RAL 7035 
(Texture or Smooth)
+ Thickness:Min 50 microns
InstallationMounted typeFloor standing
LocationIndoor
AccessFront or Front & Rear
Cable entryTop and Bottom
DimensionsDepend on single line requirement and request
compliance with our type test.
(H*W*D)mm